0

 x 

Cart empty

Pursuit 6.8m

Availability: Product not in stock!

$ 680.00
Length on deck: 22'6" 6857mm
LOA: 24'8" 7518mm
LWL: 20'9" 6324mm
Beam: 8'0" 2438mm
Freeboard: 3'4" 1016mm
Materials:
Aluminium Plate: 2400 x 1200mm 5mm 7 sheets; 4mm 3 sheets; 3mm 13 sheets;
Buy Plan or Study Print?

The PURSUIT has been designed for aluminium construction. Also included is a plywood version as the design is ideal for either medium. The aluminium version is as follows: Bottom 5mm; topsides, deck, cabin, etc. 3mm; girders 4mm. The hull is constructed over temporary frames of 112" chipboard on to which the keel, chine bars and gunwale bars are attached as well as the girders. The hull is then simply plated over both the temporary frame work on to the keel, chine bars, etc. This is a simple proven form of construction which gives a nice fair hull.

After the hull is turned over the temporary frames are removed and the 3mm aluminium floor welded into place. The plywood version is constructed from double skin plywood with the bottom of 2 skins of 6mm over wooden fore and aft girders, laminated chines, keel and gunwales. The topsides is one skin of 6mm and one of 4mm; floor 12mm, deck and cabin 9mm.

The design is a medium vee hull form which gives good stability at rest as well as offering a soft ride under way. The design features a large built-in boarding platform and stern door into the cockpit with the outboards mounted on the centre of the transom. The hull is also ideal for I/O or jet with both these drives being recessed into the stern of the craft so that nothing protrudes beyond the back of the platform. Outboards of single 80 h.p. or twin 40 h.p. up can be used on this craft. Twin 40's give a speed of 30 knots.The hull configuration makes this craft ideal for a number of cabin designs including a dodger cruiser, flying bridge or just an open centre console fishing version. The interior layout consists of two vee bunks forward with enclosed toilet compartment and galley unit.

CABIN STYLES: Standard, Centre Console, Full Cabin, Cuddy, Flying Bridge

The plan includes FULLSIZE TEMPLATES of the frames, stem, transom, etc. as well as detailed drawings on aluminum construction, cabin dimensions, etc. and a plywood conversion sheet, plus written instructions for both options.

Pelin Plans 2000 Ltd · Whangarei · New Zealand · Ph +64 0274 864 307 · info@pelinplans.co.nz 

    © 2024 Pelin Plans 2000 Ltd